You are here

Testing of biological medicines

Applicable to biological medicines, excluding vaccines, anti-venoms and toxins

19 July 2019

Book pagination

Testing requirements based on risk level

We assign products to one of five risk groups based on the outcome of a risk assessment.

  1. Risk Group 1: Pre-registration assessment and testing (grey)
  2. Risk Group 2: Full batch release - may include immediate testing (red)
  3. Risk Group 3: Grouped batch release - may include delayed testing (orange)
  4. Risk Group 4: Protocol batch release - no testing (yellow)
  5. Risk Group 5: Post-market monitoring program - periodic testing (green)
Screenshot of the five risk groups in the risk assessment tool, explained in the preceding text.

When will I know my product's risk group?

We assign the risk group once the second round of evaluation is completed. We will advise you both during and after registration of:

  • the risk group for your product
  • when, and if, your risk group changes

Risk Group 1: Pre-registration assessment and testing

Your product will fall into Risk Group 1 if it is a new biological medicine not currently on the ARTG.

Requirements for pre-registration assessment and testing

If your product falls into Risk Group 1, you will be required to supply us with:

  • a CPD document
  • pre-registration samples
  • material to perform testing, including:
    • relevant reference standards
    • controls
    • cell lines
    • any other proprietary material required

Samples submitted may be unlabelled, or carry overseas labels

Testing by TGA

We take no regulatory action based on the testing results of pre-registration samples.

We may contact you to discuss the results and methodologies.

Purpose of pre-registration assessment and testing

We conduct pre-registration assessment and testing to develop and validate test methods in our laboratory, to ensure prompt and efficient batch release testing.

We may consult you regarding testing procedures during this time.

Risk Group 2: Full batch release

Your product will fall into full batch release (Risk Group 2) if it is:

  • a new high risk biological prescription medicine
  • a variation to the manufacturing process of already registered products, assessed as:
    • posing sufficient risk
    • OR
    • deemed to be sufficiently different to the original product (e.g. transfection of a new cell-line with a different genetic construct)
  • a high risk medicine associated with severe GMP problems, life-threatening adverse events, repeated testing failures and/or product recalls

Quarantine all batches

You must quarantine all batches of products on batch release until you receive an email notification from TGA releasing each batch for distribution.

The quarantine period for each batch depends on our testing timeframes.

Time products are on batch release

Products are generally kept on full batch release until we have confirmed batch consistency. This is usually achieved by testing at least five independent active substance batches.

Urgent supply of medicines

For urgently needed products, you may request early release of your product based on the data you supplied on the understanding that:

  • this approach is required because of special circumstances
  • it does not set a precedent for the early release of any other products
  • if subsequent testing shows non-compliance with specification, a recall of the batch may be necessary

Requirements for batch release (full and grouped)

If your product falls into either full or grouped batch release (Risk Group 2 or 3), you are required to:

  • quarantine each batch
  • provide us with:
    • full certificates of analysis of the drug product and active substance batches
    • evidence of maintenance of approved temperature storage conditions during shipment to Australia for the drug product
    • samples of the drug product
    • material to perform testing, including:
      • relevant reference standards
      • controls
      • cell lines
      • any other proprietary material required.

In some cases, we may also require you to send raw data for specified assays, including:

  • gel photographs
  • chromatography traces
  • statistical analysis
Samples of the drug product

You are to provide us with batches of drug product from different, independently manufactured, active substance batches. This means:

  • when drug product batches are made from the same active substance batch, you only need to provide samples for the first drug product batch
  • for subsequent batches of drug product from the same active substance batch, you only need to supply:
    • a statement detailing the active substance identity
    • the certificate of analysis of the drug product batch(s)
    • evidence of maintenance of the approved temperature storage conditions during shipment
Submitting the requested material to TGA

Send all required materials with sufficient lead-time to allow for the appropriate testing. New products require at least two months lead time due to the need to develop and validate new test methods. Established products require two weeks lead time as they have established test methods.

Email us to make arrangements for the delivery of the requested items and to send the relevant documentation.

Under the appropriate storage conditions, send samples and materials required to:

Therapeutic Goods Administration
Laboratories Branch, Biochemistry Section
136 Narrabundah Lane
Symonston ACT 2906

Testing by TGA

We assess the submitted data and test the samples as quickly as possible to ensure you can distribute your product as soon as possible. Our testing timeframes vary.

To reduce testing timeframes, we recommend you notify us prior to sending samples so we can schedule testing at the earliest opportunity.

Testing timeframes

Our testing time varies depending on the tests involved, for example:

  • in vivo assays may take several weeks
  • a single physicochemical test may only take 5 working days
Testing results

We publish a summary of all TGA test results twice a year on our database of TGA Laboratory testing results.

We deal with any excursions from specification in consultation with you and, if necessary, other Branches of the TGA. In such cases:

  • we will contact you to negotiate the outcome
  • you will not be granted permission to distribute the product in Australia until all issues are resolved.

We inform you of our test results in a test report letter.

More information is provided in test methods and handling of results.

Purpose of full batch release

We place products on full batch release (Risk Group 2) to:

  • demonstrate manufacturing consistency of new or significantly changed medicines
  • OR
  • monitor demonstrably high risk medicines

Risk Group 3: Grouped batch release

Your product will fall into Grouped batch release (Risk Group 3) if it is:

  • a new medium risk biological prescription medicine
  • a variation to the manufacturing process of already registered products, if we assess the variation as:
    • posing sufficient risk
    • OR
    • deemed to be sufficiently different to the original product (e.g. major change to fermentation conditions like the use of serum-free medium)
  • a medium risk medicine associated with moderate GMP problems, health-threatening adverse events, repeated testing failures and/or product recalls

Quarantine all batches

You must quarantine all batches of products on batch release until you receive an email notification from TGA releasing each batch for distribution.

The time a product is on grouped batch release is the same as for products on full batch release (Risk Groups 2).

Requirements for grouped batch release

For products on grouped batch release:

  • the requirements are the same as for products on full batch release (Risk Groups 2)

However:

  • we will grant permission for you to release your product based on review of the certificates of analysis provided
  • you are not required to wait for the completion of our testing

Testing by TGA

For products on grouped batch release, we perform delayed testing.

Samples are:

  • stored appropriately until we have a sufficient quantity
  • tested together for efficiency
Testing results

We inform you of our test results in a test report letter.

We publish a summary of all TGA test results twice a year on our database of TGA Laboratory testing results.

We deal with any excursions from specification in consultation with you and, if necessary, other Branches of the TGA. In such cases:

  • we will contact you to negotiate the outcome
  • if the failure is a critical quality attribute, you will probably be required to recall the product

More information is provided in test methods and handling of results.

Purpose of grouped batch release

We place products on grouped batch release (Risk Group 3) to:

  • demonstrate manufacturing consistency of new or significantly changed medicines
  • OR
  • monitor medium risk medicines

We process products on grouped batch release (Risk Group 3) to:

  • allow rapid release for new medium-risked products
  • economise on testing resources

Risk Group 4: Protocol batch release

Your product will fall into Protocol batch release (Risk Group 4) if it is:

  • a new low risk biological prescription medicine
  • a new low to medium risk biological prescription medicine from a manufacturer with an established testing consistency record from other biological medicines
  • a variation to the manufacturing process of already registered products, if we assess the variation as:
    • posing sufficient risk
    • OR
    • deemed to be sufficiently different to the original product (e.g. implementation of more stringent test specifications for critical quality attributes)
  • a low risk medicine associated with moderate GMP problems, health-threatening adverse events, repeated testing failures and/or product recalls

Quarantine all batches

You must quarantine all batches of products on batch release until you receive an email notification from TGA releasing each batch for distribution.

Time products are on protocol batch release

For new low risk products, monitoring continues until consistency has been demonstrated (usually 5 independent active substance batches).

For products with identified problems, monitoring may continue until there is adequate resolution, even where:

  • ongoing batch release testing is completed
  • AND
  • the analytical data have been demonstrated as reliable

Once all problems have been resolved, we will email you a letter changing the conditions of registration under section 28 of the Act.

Requirements for protocol batch release

If your product falls into protocol batch release (Risk Group 4), you are required to provide us:

  • full certificates of analysis of the drug product and, where specifically requested, active substance batches
  • evidence that approved temperature storage conditions have been maintained during shipment to Australia

Timeframes for protocol review

We will usually assess the data and notify you of the outcome within 5 working days.

Purpose of protocol batch release

We place products on protocol batch release to:

  • monitor new low risk products to:
    • demonstrate batch consistency
    • ensure shipping conditions are maintained with minimal interruption to supply
  • monitor products that may have significant, but not severe, problems with:
    • GMP
    • adverse events
    • repeated testing failures and/or product recalls

Any issues for products on protocol batch release do not warrant testing of samples, such as:

  • recalls for labelling problems which don't affect the quality or safety of the product
  • when significant manufacturing problems have been reported but adequate corrective actions have been taken

Risk Group 5: Post-market monitoring program

Your product will fall into our post-market monitoring program if it:

  • is a relatively low risk
  • has demonstrated batch consistency and good compliance

Requirements for our post-market monitoring program

If your product falls into the post-market monitoring program, we require you to:

Annual product report for biological prescription medicines

You are required to complete an annual product report for biological prescription medicines. We use information in the annual report to update information in the risk assessment tool.

The annual product report requests, for that year:

  • the number of batches, and units, distributed
  • the number of deviations from approved storage conditions, during shipping (see Temperature excursions of biological medicines)
  • deviation reports for all unapproved temperature excursions

Under GMP requirements, you are expected to have immediate access to all batch data and deviation reports or justifications. If you submit inadequate deviation reports, we may request more information. Deviations should be relatively few in a well-controlled QA system.

Deadline for submitting annual product reports

You are able to negotiate the submission date by emailing us.

Product surveys

We attempt to test all biological medicines on the market at regular intervals. We calculate the testing intervals using our risk assessment tool.

Requirements

For our product surveys, when requested, you are required to provide:

  • samples of the drug product
  • material to perform testing, including:
    • relevant reference standards
    • controls
    • cell lines
    • any other proprietary material required
Our approach

During a product survey, we request samples from all sponsors marketing products:

  • with similar active substances
  • OR
  • used for similar indications

For example, we would request samples from suppliers of:

  • all insulin preparations (whether short or long acting)
  • all erythropoiesis stimulating agents (even though the active substances are different)

Testing by TGA

We inform you of our test results in a test report letter.

We publish a summary of all TGA test results twice a year on our database of TGA Laboratory testing results.

We deal with any excursions from specification in consultation with you and, if necessary, other Branches of the TGA.

Purpose of our post-market monitoring program

We attempt to test all biological medicines on the market (at regular intervals) using a risk-based prioritisation. The interval is calculated in the risk assessment tool from the inherent risk of the product.

Book pagination